http://www.stationaryengineforum.net/wanted-f1/-t1.htm Fri, 03 Sep 2010 21:13:00 GMT 10 http://i34.servimg.com/u/f34/14/14/18/87/septem11.jpg http://www.stationaryengineforum.net/wanted-f1/-t1.htm http://www.stationaryengineforum.net/wanted-f1/boot-panel-t2299.htm rab
Im getting a bit desprite for a boot panel for a 54 plate renault Megane Dynamique cabrolat 1600 16 valve.

Instead of it being pressed steel the panel is made from fiberglass and is bolted to the body.

Ive tried a lot of scrapies from Carlisle to Inverness and cant get one.

Regards
Paul]]> Wanted Fri, 03 Sep 2010 21:13:00 GMT http://www.stationaryengineforum.net/wanted-f1/boot-panel-t2299.htm#12053 http://www.stationaryengineforum.net/wanted-f1/boot-panel-t2299.htm http://www.stationaryengineforum.net/wanted-f1/wolseley-wd1-water-plate-t2268.htm mike d hi all... can anyone help..I'm after a water plate for a wolseley wd1... can you please contact me if you can help...... many thanks......mike. Wanted Tue, 17 Aug 2010 17:56:31 GMT http://www.stationaryengineforum.net/wanted-f1/wolseley-wd1-water-plate-t2268.htm#11955 http://www.stationaryengineforum.net/wanted-f1/wolseley-wd1-water-plate-t2268.htm http://www.stationaryengineforum.net/wanted-f1/small-open-crank-wanted-t2236.htm mike d HI ALL........... I'm after a small open crank...no bigger than 1 1/2 hp...ide prefer an American engine...(no silly prices please.....) Ive been trying to import some engines from the states but its the cost of shipping and crating that's killing it... the fella that i was dealing with has put his prices up and its just not worth it... then when the engines get here you have to pay that horrible VAT rrrrrrrrrr then the price goes even higher..... so I'm looking in the UK now, if ... Wanted Fri, 13 Aug 2010 12:08:11 GMT http://www.stationaryengineforum.net/wanted-f1/small-open-crank-wanted-t2236.htm#11836 http://www.stationaryengineforum.net/wanted-f1/small-open-crank-wanted-t2236.htm http://www.stationaryengineforum.net/wanted-f1/stone-crusher-t2274.htm Billman Wanted buy or borrow - small stone crusher in BA12 area (West Wiltshire) - approx 10 tonne of builder's rubble to crush - don't want to send it to landfill - hopefully as cheap to buy a small crusher as to hire in skips..... Wanted Sat, 21 Aug 2010 12:38:15 GMT http://www.stationaryengineforum.net/wanted-f1/stone-crusher-t2274.htm#11974 http://www.stationaryengineforum.net/wanted-f1/stone-crusher-t2274.htm http://www.stationaryengineforum.net/wanted-f1/lauson-engine-like-jap-2a-part-wanted-t2240.htm vespanutuk cylinder head and head gasket.
if anyone has anything or knows where i could find them please pm me,
many thanks]]> Wanted Fri, 13 Aug 2010 13:43:05 GMT http://www.stationaryengineforum.net/wanted-f1/lauson-engine-like-jap-2a-part-wanted-t2240.htm#11841 http://www.stationaryengineforum.net/wanted-f1/lauson-engine-like-jap-2a-part-wanted-t2240.htm http://www.stationaryengineforum.net/wanted-f1/small-saw-bench-t2258.htm earlsinclare anything considered.
Earl.]]> Wanted Sun, 15 Aug 2010 10:54:29 GMT http://www.stationaryengineforum.net/wanted-f1/small-saw-bench-t2258.htm#11866 http://www.stationaryengineforum.net/wanted-f1/small-saw-bench-t2258.htm http://www.stationaryengineforum.net/wanted-f1/norman-sc-parts-wanted-t2239.htm vespanutuk im looking for the following parts for a norman SC i have just bought.
alloy inlet tube that goes upto airfilter, air filter itself, flexi exhaust or original silencer for a sc, handbook.
if anyone has any of these to sell then please PM me.
many thanks in advance]]> Wanted Fri, 13 Aug 2010 13:40:52 GMT http://www.stationaryengineforum.net/wanted-f1/norman-sc-parts-wanted-t2239.htm#11839 http://www.stationaryengineforum.net/wanted-f1/norman-sc-parts-wanted-t2239.htm http://www.stationaryengineforum.net/wanted-f1/best-lloyd-oil-pump-mk-ii-no5061-wanted-t2211.htm ianrichards It does not need to be complete as long as the outer casing is OK.
The screw threads have sheared off the outflow on mine :-(
TIA
Ian Richards

07771523505
01579 382785
ian@ian-richards.com]]> Wanted Sun, 01 Aug 2010 08:44:07 GMT http://www.stationaryengineforum.net/wanted-f1/best-lloyd-oil-pump-mk-ii-no5061-wanted-t2211.htm#11754 http://www.stationaryengineforum.net/wanted-f1/best-lloyd-oil-pump-mk-ii-no5061-wanted-t2211.htm http://www.stationaryengineforum.net/wanted-f1/villiers-wx11-spares-t2205.htm Skankin_giant Hello After a few bits for my WX11, what I would like is: Villiers WX11 Air Cleaner/Filter, Villiers Magneto Cover (one with out the whole in the centre) and a Tail pipe for one, After a 90 degree bend type Like the bits on my other WX11: A copy of a Manual would be great aswell! Oh and where to get Iron BSP pipe fittings and petrol pipe fittings etc? Would be grateful for any help Cheers Steve Wanted Mon, 26 Jul 2010 12:23:28 GMT http://www.stationaryengineforum.net/wanted-f1/villiers-wx11-spares-t2205.htm#11736 http://www.stationaryengineforum.net/wanted-f1/villiers-wx11-spares-t2205.htm http://www.stationaryengineforum.net/wanted-f1/villiers-wx11-t2192.htm Skankin_giant
After a Wx11 tank or hopper cooled,

Just fancy another one.

Cheers Steve

Update* I think im sorted.....Just need to get to Norfolk

Cheers Steve]]> Wanted Tue, 13 Jul 2010 10:49:28 GMT http://www.stationaryengineforum.net/wanted-f1/villiers-wx11-t2192.htm#11701 http://www.stationaryengineforum.net/wanted-f1/villiers-wx11-t2192.htm http://www.stationaryengineforum.net/wanted-f1/open-crank-hit-and-miss-wanted-t2180.htm davidml4
Thanks, David]]> Wanted Wed, 07 Jul 2010 13:56:23 GMT http://www.stationaryengineforum.net/wanted-f1/open-crank-hit-and-miss-wanted-t2180.htm#11663 http://www.stationaryengineforum.net/wanted-f1/open-crank-hit-and-miss-wanted-t2180.htm http://www.stationaryengineforum.net/wanted-f1/v-belt-pulley-to-fit-jap-2a-t2183.htm BRASSO
I am after a V belt pulley wheel to fit my lads JAP 2A.

If anybody has one please contact me.

Cash and postage will be paid.

Cheers

Mart.
]]> Wanted Thu, 08 Jul 2010 10:38:00 GMT http://www.stationaryengineforum.net/wanted-f1/v-belt-pulley-to-fit-jap-2a-t2183.htm#11672 http://www.stationaryengineforum.net/wanted-f1/v-belt-pulley-to-fit-jap-2a-t2183.htm http://www.stationaryengineforum.net/wanted-f1/jap-model-3-throttle-governor-control-bits-t2160.htm Skankin_giant

After the throttle and governor control bits for a JAP model 3 if anyone can help?


Cheers Steve]]> Wanted Sun, 27 Jun 2010 14:22:43 GMT http://www.stationaryengineforum.net/wanted-f1/jap-model-3-throttle-governor-control-bits-t2160.htm#11567 http://www.stationaryengineforum.net/wanted-f1/jap-model-3-throttle-governor-control-bits-t2160.htm http://www.stationaryengineforum.net/wanted-f1/jap-model-3-throttle-governor-control-bits-t2159.htm Skankin_giant

After the throttle and governor control bits for a JAP model 3 if anyone can help?


Cheers Steve]]> Wanted Sun, 27 Jun 2010 14:21:39 GMT http://www.stationaryengineforum.net/wanted-f1/jap-model-3-throttle-governor-control-bits-t2159.htm#11566 http://www.stationaryengineforum.net/wanted-f1/jap-model-3-throttle-governor-control-bits-t2159.htm http://www.stationaryengineforum.net/wanted-f1/petrol-tank-t2153.htm Skankin_giant
Cheers Steve]]> Wanted Fri, 25 Jun 2010 12:07:26 GMT http://www.stationaryengineforum.net/wanted-f1/petrol-tank-t2153.htm#11542 http://www.stationaryengineforum.net/wanted-f1/petrol-tank-t2153.htm http://www.stationaryengineforum.net/wanted-f1/lister-d-or-f-radiator-t2037.htm Old Lister D Thanks
SYD]]> Wanted Sat, 22 May 2010 12:09:00 GMT http://www.stationaryengineforum.net/wanted-f1/lister-d-or-f-radiator-t2037.htm#11024 http://www.stationaryengineforum.net/wanted-f1/lister-d-or-f-radiator-t2037.htm http://www.stationaryengineforum.net/wanted-f1/blarge-belt-driven-water-pump-b-t2022.htm pistolpete61 ]]> Wanted Sat, 15 May 2010 14:17:39 GMT http://www.stationaryengineforum.net/wanted-f1/blarge-belt-driven-water-pump-b-t2022.htm#10978 http://www.stationaryengineforum.net/wanted-f1/blarge-belt-driven-water-pump-b-t2022.htm http://www.stationaryengineforum.net/wanted-f1/lister-h2-pump-priming-pipe-t1990.htm BRASSO
The one on my pump is missing, if anybody knows where I can get one it will save me having to get one made.

Send me a PM if you can help.

Cheers

Mart.]]> Wanted Mon, 03 May 2010 21:54:25 GMT http://www.stationaryengineforum.net/wanted-f1/lister-h2-pump-priming-pipe-t1990.htm#10838 http://www.stationaryengineforum.net/wanted-f1/lister-h2-pump-priming-pipe-t1990.htm http://www.stationaryengineforum.net/wanted-f1/exhaust-silencer-t1989.htm Skankin_giant
anyone got anything to fit?

Cheers Steve]]> Wanted Mon, 03 May 2010 19:41:25 GMT http://www.stationaryengineforum.net/wanted-f1/exhaust-silencer-t1989.htm#10834 http://www.stationaryengineforum.net/wanted-f1/exhaust-silencer-t1989.htm http://www.stationaryengineforum.net/wanted-f1/maytag-or-similar-t1968.htm Skankin_giant
not fussed on condition, would like a resto project, would prefer complete,

got a reasonable budget, nothing amanco money!

WHYG?

Cheers Steve]]> Wanted Tue, 27 Apr 2010 15:09:09 GMT http://www.stationaryengineforum.net/wanted-f1/maytag-or-similar-t1968.htm#10731 http://www.stationaryengineforum.net/wanted-f1/maytag-or-similar-t1968.htm http://www.stationaryengineforum.net/wanted-f1/water-pump-t1966.htm mike d
im after another project.....,has anyone got a water pump for sale that mite need some work..... cant finish my lister h1 as i cant sorce the rest of the bits i want just yet.....

if you can help please pm me with a land line number and i will phone you....
nothing to big as im limited for room.....

many thanks for your time.....

regards.....mike d.]]> Wanted Mon, 26 Apr 2010 22:22:31 GMT http://www.stationaryengineforum.net/wanted-f1/water-pump-t1966.htm#10723 http://www.stationaryengineforum.net/wanted-f1/water-pump-t1966.htm http://www.stationaryengineforum.net/wanted-f1/bernard-w0-wanted-conord-f0-t1950.htm Skankin_giant
Cheers Steve]]> Wanted Sat, 24 Apr 2010 20:57:11 GMT http://www.stationaryengineforum.net/wanted-f1/bernard-w0-wanted-conord-f0-t1950.htm#10638 http://www.stationaryengineforum.net/wanted-f1/bernard-w0-wanted-conord-f0-t1950.htm http://www.stationaryengineforum.net/wanted-f1/lister-h1-water-pump-spares-t1951.htm mike d can anyone tell me where i can get any spares for a LISTER H1 WATER PUMP..

please can you let me know...many thanks....

mike d.]]> Wanted Sat, 24 Apr 2010 21:00:51 GMT http://www.stationaryengineforum.net/wanted-f1/lister-h1-water-pump-spares-t1951.htm#10639 http://www.stationaryengineforum.net/wanted-f1/lister-h1-water-pump-spares-t1951.htm http://www.stationaryengineforum.net/wanted-f1/teagle-wanted-t1944.htm Skankin_giant
any condition, would like complete,

can travel abit, or will pay for postage from the guys (and girls) up north.

Cheers Steve]]> Wanted Sat, 24 Apr 2010 10:36:07 GMT http://www.stationaryengineforum.net/wanted-f1/teagle-wanted-t1944.htm#10621 http://www.stationaryengineforum.net/wanted-f1/teagle-wanted-t1944.htm http://www.stationaryengineforum.net/wanted-f1/dynamo-to-fit-stuart-t1899.htm Skankin_giant
i will measure up the the base a bit later

Has anyone got anyting?

Cheers Steve]]> Wanted Sat, 10 Apr 2010 15:26:12 GMT http://www.stationaryengineforum.net/wanted-f1/dynamo-to-fit-stuart-t1899.htm#10452 http://www.stationaryengineforum.net/wanted-f1/dynamo-to-fit-stuart-t1899.htm http://www.stationaryengineforum.net/wanted-f1/small-2-stroke-t1898.htm Skankin_giant
not fused what it is Jap, Villiers, a teagle would be very nice!

cant be anymore then about a hour from SN13, Corsham.

Cheers Steve]]> Wanted Sat, 10 Apr 2010 12:35:57 GMT http://www.stationaryengineforum.net/wanted-f1/small-2-stroke-t1898.htm#10451 http://www.stationaryengineforum.net/wanted-f1/small-2-stroke-t1898.htm http://www.stationaryengineforum.net/wanted-f1/jap-2a-wanted-t1882.htm earlsinclare thanks in advance earl.]]> Wanted Wed, 07 Apr 2010 18:15:49 GMT http://www.stationaryengineforum.net/wanted-f1/jap-2a-wanted-t1882.htm#10415 http://www.stationaryengineforum.net/wanted-f1/jap-2a-wanted-t1882.htm http://www.stationaryengineforum.net/wanted-f1/stuart-turner-float-t1878.htm Skankin_giant
after a float and retaining clip for a stuart turner carb

Cheers Steve]]> Wanted Mon, 05 Apr 2010 18:14:13 GMT http://www.stationaryengineforum.net/wanted-f1/stuart-turner-float-t1878.htm#10390 http://www.stationaryengineforum.net/wanted-f1/stuart-turner-float-t1878.htm http://www.stationaryengineforum.net/wanted-f1/starter-wicks-t1832.htm aford hi we have a howard gem with a diesel engine be we have very fue starter wicks left does anybody know where we can get tham Wanted Mon, 29 Mar 2010 12:26:11 GMT http://www.stationaryengineforum.net/wanted-f1/starter-wicks-t1832.htm#10229 http://www.stationaryengineforum.net/wanted-f1/starter-wicks-t1832.htm http://www.stationaryengineforum.net/wanted-f1/volts-ammeter-guages-t1829.htm Lister John
I'm after some guages for "another" dynamo which has found a new home with me!

Its 230/240volts.

Please if you have anything which you consider suitable could you PM me or reply here?

Thanks...John]]> Wanted Sun, 28 Mar 2010 22:01:03 GMT http://www.stationaryengineforum.net/wanted-f1/volts-ammeter-guages-t1829.htm#10224 http://www.stationaryengineforum.net/wanted-f1/volts-ammeter-guages-t1829.htm http://www.stationaryengineforum.net/wanted-f1/smallish-petrol-tank-t1820.htm Skankin_giant
anything like this would be great!



Cheers Steve]]> Wanted Wed, 24 Mar 2010 21:58:07 GMT http://www.stationaryengineforum.net/wanted-f1/smallish-petrol-tank-t1820.htm#10173 http://www.stationaryengineforum.net/wanted-f1/smallish-petrol-tank-t1820.htm http://www.stationaryengineforum.net/wanted-f1/wanted-bamford-tulip-top-t1817.htm Hughesy
Im after a bamford tulip top. must be complete not so worried about running. must all be there though.

whats anyone got

Lewis]]> Wanted Wed, 24 Mar 2010 10:25:43 GMT http://www.stationaryengineforum.net/wanted-f1/wanted-bamford-tulip-top-t1817.htm#10164 http://www.stationaryengineforum.net/wanted-f1/wanted-bamford-tulip-top-t1817.htm http://www.stationaryengineforum.net/wanted-f1/wanted-small-set-of-cast-iron-wheels-t1806.htm BRASSO
6" or 7" would be ideal.

Local to Cornwall would be good, cash waiting.

Cheers

Mart.]]> Wanted Sun, 21 Mar 2010 21:55:53 GMT http://www.stationaryengineforum.net/wanted-f1/wanted-small-set-of-cast-iron-wheels-t1806.htm#10137 http://www.stationaryengineforum.net/wanted-f1/wanted-small-set-of-cast-iron-wheels-t1806.htm http://www.stationaryengineforum.net/wanted-f1/wanted-sprocket-t1795.htm pulsechoes I'm looking for a chain sprocket to go on my Ruston PB1.5hp. About 18 tooth x 1.25" shaft dia. Anyone help, please?? Wanted Sat, 20 Mar 2010 10:01:36 GMT http://www.stationaryengineforum.net/wanted-f1/wanted-sprocket-t1795.htm#10100 http://www.stationaryengineforum.net/wanted-f1/wanted-sprocket-t1795.htm http://www.stationaryengineforum.net/wanted-f1/lucas-rs1-coil-cover-needed-to-make-a-mould-t1786.htm ou enjin Hello everybody, I am looking for a coil cover for a Lucas RS1 (bread loaf) magneto in a very good condition. The cover needs to be as new, and if possible really new (and NOT a reproduction). The cover I am looking for shouldn’t have scratches, cracks or chips broken out the edges. The reason: I need this cover to make a good mould. With a spotless original I can make a perfect mould and a reproduction exactly like the original. I am already reproducing some other coil covers with ... Wanted Thu, 18 Mar 2010 19:34:13 GMT http://www.stationaryengineforum.net/wanted-f1/lucas-rs1-coil-cover-needed-to-make-a-mould-t1786.htm#10069 http://www.stationaryengineforum.net/wanted-f1/lucas-rs1-coil-cover-needed-to-make-a-mould-t1786.htm http://www.stationaryengineforum.net/wanted-f1/some-advice-t1689.htm Statman
As some of you may well know ive sold a few engines.....

My Next engine i will love to have is either a Petter M or a Villiers WX11

Also im wondering does have anyone have either of these for sale??

Thanks
Adam]]> Wanted Wed, 03 Mar 2010 19:03:04 GMT http://www.stationaryengineforum.net/wanted-f1/some-advice-t1689.htm#9787 http://www.stationaryengineforum.net/wanted-f1/some-advice-t1689.htm http://www.stationaryengineforum.net/wanted-f1/cub-diesel-handbook-t1776.htm pulsechoes Hi All, I'm looking for a handbook for a Cub Horizontal Twin Diesel Engine. Anyone help???[b] Wanted Wed, 17 Mar 2010 00:47:52 GMT http://www.stationaryengineforum.net/wanted-f1/cub-diesel-handbook-t1776.htm#10036 http://www.stationaryengineforum.net/wanted-f1/cub-diesel-handbook-t1776.htm http://www.stationaryengineforum.net/wanted-f1/lister-d-mag-chain-t1760.htm Lister John
I'm after a mag drive chain for my 2hp D.

Fairly desperate for it aswell.

Please PM me with a price.


Many Thanks.....John]]> Wanted Sat, 13 Mar 2010 19:32:46 GMT http://www.stationaryengineforum.net/wanted-f1/lister-d-mag-chain-t1760.htm#9982 http://www.stationaryengineforum.net/wanted-f1/lister-d-mag-chain-t1760.htm http://www.stationaryengineforum.net/wanted-f1/villiers-mk10-t1730.htm stuart turner hi does anybody have a fuel tank for sale for a mk 10 villiers engine many thanks regards paul Wanted Mon, 08 Mar 2010 22:45:18 GMT http://www.stationaryengineforum.net/wanted-f1/villiers-mk10-t1730.htm#9893 http://www.stationaryengineforum.net/wanted-f1/villiers-mk10-t1730.htm http://www.stationaryengineforum.net/wanted-f1/wanted-petter-a1-piston-rings-t1721.htm jones4276
I need a Petter A1 oil control ring.

Just snapped mine :-(

Regards]]> Wanted Mon, 08 Mar 2010 10:39:39 GMT http://www.stationaryengineforum.net/wanted-f1/wanted-petter-a1-piston-rings-t1721.htm#9868 http://www.stationaryengineforum.net/wanted-f1/wanted-petter-a1-piston-rings-t1721.htm http://www.stationaryengineforum.net/wanted-f1/wanted-lister-d-t1705.htm firefly
I am looking for my first lister engine to restore A lister D seems to be the one but I don't now much about them I know there is plenty of help on the forum.]]> Wanted Sun, 07 Mar 2010 07:52:30 GMT http://www.stationaryengineforum.net/wanted-f1/wanted-lister-d-t1705.htm#9832 http://www.stationaryengineforum.net/wanted-f1/wanted-lister-d-t1705.htm http://www.stationaryengineforum.net/wanted-f1/open-crank-t1703.htm kevster hopefully I'm not being to tight with this sum!.
will travel about 2-3 hours, so all wales,Manchester,brom,Bristol radius.
thx kev]]> Wanted Sat, 06 Mar 2010 20:38:41 GMT http://www.stationaryengineforum.net/wanted-f1/open-crank-t1703.htm#9827 http://www.stationaryengineforum.net/wanted-f1/open-crank-t1703.htm http://www.stationaryengineforum.net/wanted-f1/exhausts-required-t1681.htm BRASSO
I think the thread is possibly 1/4 BSP? (Measures 1/2 ")

Your help is appreciated.

Kind regards

Martin.]]> Wanted Tue, 02 Mar 2010 09:33:05 GMT http://www.stationaryengineforum.net/wanted-f1/exhausts-required-t1681.htm#9766 http://www.stationaryengineforum.net/wanted-f1/exhausts-required-t1681.htm http://www.stationaryengineforum.net/wanted-f1/teagle-engine-t1680.htm Skankin_giant
so didnt know if anyone had one laying around any model aslongs as its complete.

also the closer to Chippenham the better.

Cheers Steve]]> Wanted Mon, 01 Mar 2010 22:29:46 GMT http://www.stationaryengineforum.net/wanted-f1/teagle-engine-t1680.htm#9765 http://www.stationaryengineforum.net/wanted-f1/teagle-engine-t1680.htm http://www.stationaryengineforum.net/wanted-f1/ruston-hornby-float-t1670.htm Anonymous
Ive received a pm from Bob Freeman who is looking for the item below, If anyone can help him out PM him directly to discuss the pros and cons.

ruston hornby float 3hp pb if anyone has one please needed for rallys starting in about 4 weeks thanks


Thanks all,
Paul]]> Wanted Sun, 28 Feb 2010 13:25:27 GMT http://www.stationaryengineforum.net/wanted-f1/ruston-hornby-float-t1670.htm#9740 http://www.stationaryengineforum.net/wanted-f1/ruston-hornby-float-t1670.htm http://www.stationaryengineforum.net/wanted-f1/flywheel-mag-parts-t1650.htm Skankin_giant 2 steps forward 1 step back!

Cheers Steve]]> Wanted Thu, 25 Feb 2010 18:06:30 GMT http://www.stationaryengineforum.net/wanted-f1/flywheel-mag-parts-t1650.htm#9694 http://www.stationaryengineforum.net/wanted-f1/flywheel-mag-parts-t1650.htm http://www.stationaryengineforum.net/wanted-f1/alternator-dynamo-pulley-t1610.htm Paul_sterling hi chaps whilst working on the fergy we've found we need a pulley for an alternator for a B section belt, rather than the A section belt that you would find on a car. so if anyones got a B section dynamo or alternator pulley i' very much apreciate it if you could let me know a pressed steel pully, like you would find on an alternator, is what we need. a B section pulley by the way, is, if you cut the belt across its cross section, 17mm on the outside face, and 11mm on the inside. cheers Paul Wanted Tue, 16 Feb 2010 11:57:40 GMT http://www.stationaryengineforum.net/wanted-f1/alternator-dynamo-pulley-t1610.htm#9516 http://www.stationaryengineforum.net/wanted-f1/alternator-dynamo-pulley-t1610.htm http://www.stationaryengineforum.net/wanted-f1/bamford-tulip-top-fuel-inlet-needle-t1591.htm rab ]]> Wanted Thu, 11 Feb 2010 05:18:20 GMT http://www.stationaryengineforum.net/wanted-f1/bamford-tulip-top-fuel-inlet-needle-t1591.htm#9412 http://www.stationaryengineforum.net/wanted-f1/bamford-tulip-top-fuel-inlet-needle-t1591.htm http://www.stationaryengineforum.net/wanted-f1/gib-head-keys-t1542.htm Vintage Magnetos Hello to all. I need a Supplier or sale Gib Head Keys. The Size i'm after is:- 5/16"x5/16"X 2 1/2" long. Anyone how sales these Keys or may have one in there Tool box with other Engine Parts Would be Great. This is to hold the Fywheel to the Crank shaft,and it's a 5/16" square hole. the key that I had to drill out was 2 1/2" Long. Looking forward hearing from you soon. Have A good crank up for 2010. Wanted Wed, 03 Feb 2010 19:52:53 GMT http://www.stationaryengineforum.net/wanted-f1/gib-head-keys-t1542.htm#9234 http://www.stationaryengineforum.net/wanted-f1/gib-head-keys-t1542.htm http://www.stationaryengineforum.net/wanted-f1/villiers-flywheel-t1527.htm earlsinclare thanks in advance Earl.]]> Wanted Sun, 31 Jan 2010 18:58:08 GMT http://www.stationaryengineforum.net/wanted-f1/villiers-flywheel-t1527.htm#9192 http://www.stationaryengineforum.net/wanted-f1/villiers-flywheel-t1527.htm